Search for:

ED-A92

Desktop Microphone

FEATURES

  • Three buttons, CHIME, Push-To-Talk and ON/OFF
  • Push-To-Talk for short statement
  • ON/OFF for long speech
  • XLR connecto

X-NPMI-D

X-NPMI Configurable Network Paging Console

  • 4.3-inch color LCD touch screen
  • Intuitive and simple user interface
  • Detachable gooseneck microphone
  • Built-in monitor loudspeaker
  • Digital audio processing
  • Flush mount desktop installation available

X-NPMI Configurable Network Paging Console is a key module in X-618 Digital Public Address and
Voice Alarm System. It provides paging, monitoring, full duplex communication, touch screen operation and other configurable functions.

FEATURES

CONNECTIONS

  • X-618 system can connect with up to 20 X-NPMI via Ethernet. X-NPMI can be used as a node anywhere in the network. To reduce wiring cost, the devices can be connected into an existing network provided that there is sufficient bandwidth to reduce wiring cost.

AUDIO TRANSMISSION

  • The device comes with a detachable gooseneck microphone. Users can change different types of microphone for different real-time broadcasting requirements. The received audio signal will be digitalized to eliminate sound distortion during transmission.
  • The built-in speaker not only can be used for zone monitoring but also full-duplex intercom with other X-NPMI in the network.
  • X-NPMI supports fail-safe operation. Even when the connected X-DCS2000/EN fails, X-NPMI is still able to communicate with other X-NPMI and broadcast through other X-DCS2000/EN in the network.

TOUCH SCREEN

  • Users can operate directly on the innovative 4.3-inch color LCD touch screen without adding an extra key module unit. With the touch screen, users can supervise the system status, select broadcast zones, assign zone groups or other broadcast controls, including setting playlists, timing road castings etc. With the built-in configuration software, zones broadcast status or button functions can be configured easily.

SHORT-CUT OPERATION

  • X-NPMI has three short-cut buttons on the operation panel: microphone switch, all-zone emergency broadcast button can switch the system to emergency broadcast mode, where recorded evacuation message will be played and fire alarm will be activated without delay.

L-PPP20A

L-PPP20A is a 20W modern style pendant loudspeaker. Its low-profile, white color design blends easily with most interiors in locations such as warehouses, supermarkets, concourses, factories etc. This modern styled spherical loudspeaker is a true omni-directional loudspeaker, providing coverage angles of 360 degrees horizontal and 140~160 degrees vertical, even giving an dispersion over the audio spectrum.

Suitable for speech and music reproduction Simple power setting Easy installation Robust fire resistant ABS enclosure Supplied with a 2m long fire resistant cable Compliant with international safety laws

HMC-2000-D

DIntevio Call Station

About The Intevio Public Address And Voice Alarm
Range

Honeywell’s INTEVIO Public Address and Voice Alarm system is the ideal solution for single buildings. It is an integrated solution that can provide better stability, costsavings, and higher user experience and performance:

Better safety and stability
• Complies with international standards
• A highly compact and integrated system
• Simple and easy to use with an innovative design
• Provides easy access to status updates, amplifier backup, logging and direct paging capabilities
Highly efficient solution
• Plug-and-play with default settings
• Intuitive set-up with step-by-step guided interaction between buttons and screens
• Can achieve all calls by configurable keys
• Auto configures when components are physically connected

Description
HMC-2000 is the call station for the INTEVIO system which allows user to deliver live paging and trigger background music, service broadcast or emergency broadcast to the selected speaker groups. It can also be used for volume control, temporary recording and audio monitoring, etc. Up to 6 call stations can be connected together in the system.

Functions
Buttons
HMC-2000 has 8 functional buttons and 8 free configurable buttons. The functional buttons are used for regular functions such as all call, zone close, audio monitoring, temporary recording, recording playback, line input selection and microphone switch. The configurable buttons can be programmed as speaker group selection, broadcast task selection or volume control. The operation mode of the buttons can be configured as press or toggle. More buttons can be added by connecting extension keypad X-K4 and X-K8.

Audio monitoring
HMC-2000 has the built-in monitoring speaker to monitor the audio source in channel 1 and channel 2, which helps prevent mistaken broadcasting and increase operation efficiency.
Record and play
HMC-2000 allows user to record the temporary messages and broadcast it immediately without configuration. It’s a function for operation efficiency improvement, especially for the application such as shopping mall/supermarket where the promotion message needs to be frequently updated.
Fault detection and status indication
HMC-2000 can detect the fault of the gooseneck microphone and communication line. It has 4 LED
indicators to show different status of the unit: power supply, general fault, network fault and busy audio channel.
Line input
With one line input, HMC-2000 allows user to connect the external audio source such as CD, DVD, tuner,
etc. and broadcast it without configuration. • With 1 line

FEATURES

  • 8 free configurable buttons, expandable with keypad X-K4/X-K8
  • Built-in loudspeaker for audio monitoring
  • Supports temporary record and playback
  • With 1 line input to connect with external audio source

HN-A480-B

Power Amplifier (Rated Power Output: 480W)

Featuring combination XLR/RCA line-in and line-out connectors, the HN-A480 power amplifier delivers 100V and 4-16 Ohms speaker outputs (transformer-isolated). Features like LED status, extensive heat sinking and short-circuit protection make the HN-A480 one of the best power amplifiers in its class.

FEATURES

  • 480W Rated Power
  • 4 ~ 16 Ω Low – Z output 480 W, 70 V (10.7Ω) 100 V (21.7Ω) Speaker Output
  • <1 V , unbalanced Line Input
  • 1V unbalanced Line Output
  • 200 Damping Factor
  • 60 Hz ~ 15 kHz (± 3 dB) Frequency Response

HEX-24-D

Intevio 24-Zone Expander

HEX-24

About The Intevio Public Address And Voice Alarm
Range
Honeywell’s INTEVIO Public Address and Voice Alarm system is the ideal solution for single buildings. It is an integrated solution that can provide better stability, costsavings, and higher user experience and performance:
Better safety and stability
• Complies with international standards
• A highly compact and integrated system
• Simple and easy to use with an innovative design
• Provides easy access to status updates, amplifier backup, logging and direct paging capabilities
Highly efficient solution
• Plug-and-play with default settings
• Intuitive set-up with step-by-step guided interaction between buttons and screens
• Can achieve all calls by configurable keys
• Auto configures when components are physically connected

Description
HEX-24 is the zone expansion device controlled by HCU2000, which adds 24 speaker zones and 24 contact inputs to the INTEVIO system. HEX-24 can connect with up to 6 external power amplifiers and 1 backup amplifier. Up to 5 nos. of HEX-24 can be used together in the system.

Functions
Input/output
HEX-24 has 24 contact inputs that can be linked with the fire alarm system to trigger the alert and
evacuation messages when fire happens. 1 line input is provided to connect with external audio source.
HEX-24 has 24 nos. of 100V speaker outputs which can connect up to 24 speaker circuits. One 24VDC
output is provided to power external device.

Automatic fault diagnosis
HEX-24 has powerful automatic fault diagnosis function to supervise various types of faults such as main power, backup power, CPU, power amplifier, speaker circuits, communication line, etc. All the fault information will be shown on the LED indicators on the front panel.
Allow broadcast even the controller CPU malfunctions
The external audio source connected to the line input can still be delivered to all the local zones when the controller CPU malfunctions. This function can reduce the system downtime due CPU failure and increase the safety level during emergency.

FEATURES
  • Expands up to 24 Zones for INTEVIO system
  • Supports one-for-all amplifier backup
  • Automatic fault diagnosis
  • With 1 line input and 24 contact inputs

HEX-8-B

Intevio 8-Zone Expander

HEX-8

About The Intevio Public Address And Voice Alarm
Range
Honeywell’s INTEVIO Public Address and Voice Alarm system is the ideal solution for single buildings. It is an integrated solution that can provide better stability, costsavings, and higher user experience and performance:

Better safety and stability
• Complies with international standards
• A highly compact and integrated system
• Simple and easy to use with an innovative design
• Provides easy access to status updates, amplifier backup, logging and direct paging capabilities
Highly efficient solution
• Plug-and-play with default settings
• Intuitive set-up with step-by-step guided interaction between buttons and screens
• Can achieve all calls by configurable keys
• Auto configures when components are physically connected

Description
HEX-8 is the zone expansion device controlled by HCU-2000, which adds 8 speaker zones, 8 monitored contact inputs and 8 contact outputs to the INTEVIO system. HEX-8 can connect with up to 4 external power amplifiers and 1 backup amplifier. Up to 15 nos. of HEX-8 can be used together in the system.
Functions
Input/output
HEX-8 has 8 monitored contact inputs that can be linked with the fire alarm system to trigger the alert and evacuation messages when fire happens. 1 line input is provided to connect with external audio source.

HEX-8 also has 8 contact outputs that can be used to activate external devices. It has 8 pairs of 100V speaker outputs where each one allows multiple loudspeakers to be connected in parallel. Two audio output ports for audio channel 1 and audio channel 2 can be used to connect with 3rd party power amplifiers or devices. One 24VDC output is provided to power external device.
Automatic fault diagnosis
HEX-8 has power automatic fault diagnosis function to supervise various types of faults such as main power, backup power, CPU, power amplifier, speaker circuits, dry contact inputs, communication line, etc. All the fault information will be shown on the LED indicators on the front panel.
Allow broadcast even the controller CPU malfunctions
The external audio source connected to the line input can still be delivered to all the local zones when the controller CPU malfunctions. This function can reduce the system downtime due CPU failure and increase the safety level during emergency.

FEATURES
  • Expands up to 8 Zones for INTEVIO system
  • Supports single audio channel mode & dual audio channel mode
  • Supports one-for-all amplifier backup
  • Automatic fault diagnosis
  • With 1 line input, 8 monitored contact inputs and 8 contact outputs

X-MAP4P-D

FEATURES
  • DIGITAL MULTI-AUDIO PLAYER, BLUETOOTH
  • FM: 87.5 … 108 MHz
  • Signal-to-noise ratio: > 80 dB
  • Harmonic distortion at the nominal level: < 0.05 %
  • Frequency response: 20-20 kHz ± 3 dB
  • Output voltage: 2 VDC ± 0,2 V
  • Rated voltage: 100-240 VAC 50/60 Hz
  • Power consumption: < 15W
  • Inputs: FM 75 Ω, USB-Port, SD-Port, Bluetooth
  • Outputs: 3 x Stereo RCA (Cinch)
  • Net weight: 2.25 kg
  • Gross weight: 3.6 kg
  • Dimensions (W x H x D): 482 mm x 44 mm x 236 mm (1 HU)