Search for:

HM/RHSE/UL

The HM-FHSE-UL, HM-RHSE-UL and HM-HTSE-UL Series thermal detectors are addressable sensors that use a stateof-the-art thermistor sensing circuit for fast response. These sensors provide protection for open areas and can be used use with addressable Fire Alarm Control Panels (FACPs).

The HM-FHSE-UL and HM-RHSE-UL sensors provide fixed temperature detection at 135°F (57°C). The HM-RHSE-UL sensor also responds to rate of rise conditions of greater than 15°F (8.3°C) per minute. The HM-HTSE-UL is a fixed, high-temperature detector that activates at 190°F (88°C). These thermal detectors provide addressable property protection for a variety of applications.

Comes with two LEDs on each sensor that provide a local, visible sensor indication. The remote LED annunciator capability is available using an optional accessory, the RA100Z.

  • SLC Loops:
    • Two-wire SLC loop connection
    • Unit uses base for wiring
  • Addressing:
    • Addressable by device
    • Rotary, decimal addressing: 1- 159 for models SMX and STX
  • Architecture:
    • Sleek, low-profile, stylish design
    • State-of-the-art thermistor technology for fast response
    • Integral communications and builtin device-type identification
    • Built-in tamper resistant feature
    • Built-in functional test switch activated by external magnet
  • Operation:
    • Factory preset at 135°F (57°C) for the HM-FHSE-UL and HM-RHSE-UL; 190°F (88°C) for the HM-HTSE-UL
    • Rate-of-rise triggers at 15°F (8.3°C) per minute for the H355R(A)
    • 360-degree viewing angle of the visual alarm indicators. LEDs blink red in Normal condition and steadily illuminate red in Alarm
    • Visible LEDs blink every time the unit is addressed Mechanicals:
    • Sealed against back pressure
    • SEMS screws for wiring of the separate base
    • Designed for direct-surface or electrical-box mounting
    • Plugs into separate base for ease of installation and maintenance
  • Other system features:
    • Remote test feature from the panel
    • Walk test with address display
    • Low standby current
    • 94-5V plastic flammability rating
  • Options:
    • Flanged surface mounting kit

HM/PTSE/UL

The HM-PTSE-UL detector is an intelligent, addressable, multi-sensing, low-profile detector designed for Fire Alarm Control Panels.

The detector uses a combination of photoelectric and thermal sensing technologies to reduce to false alarms. Unlike traditional intelligent detectors, it has a microprocessor that processes alarm
data. As a result, the detector adjusts its sensitivity automatically, without operator intervention or control panel programming.

Areas where the detector is especially useful include office complexes, schools, college campuses, manufacturing, and industrial facilities, and anywhere else where the use of a particular area may change.
The detector automatically adjusts its sensitivity to the environment.

  • Automatically adjusts sensitivity levels without operator intervention or programming
  • • Sensitivity increases with heat
  • • Microprocessor-based, combination photo and thermal technology
  • • Addressable-analog communication
  • • Sleek, low-profile design
  • • Two-wire SLC connection
  • • Addressing:
    • Addressable by device
    • Rotary, decimal addressing: 1- 159 for models SMX and STX
  • Addresses can be viewed and changed without electronic programmers
  • Dual bi-color LED design provides 360° viewing angle
  • LEDs lock red when in alarm.
  • Built-in, tamper-resistant feature
  • Constructed of off-white, fire-resistant plastic, designed to commercial standards, and offers an attractive appearance
  • SEMS screws for wiring of the separate base
  • Several base options, including relay, isolator, and sounder
  • Built-in functional test switch activated by external magnet
  • Listed to UL 268

HM/HTSE/UL

The HM-FHSE-UL, HM-RHSE-UL and HM-HTSE-UL Series thermal detectors are addressable sensors that use a stateof-the-art thermistor sensing circuit for fast response. These sensors provide protection for open areas and can be used use with addressable Fire Alarm Control Panels (FACPs).

The HM-FHSE-UL and HM-RHSE-UL sensors provide fixed temperature detection at 135°F (57°C). The HM-RHSE-UL sensor also responds to rate of rise conditions of greater than 15°F (8.3°C) per minute. The HM-HTSE-UL is a fixed, high-temperature detector that activates at 190°F (88°C). These thermal detectors provide addressable property protection for a variety of applications.

Comes with two LEDs on each sensor that provide a local, visible sensor indication. The remote LED annunciator capability is available using an optional accessory, the RA100Z.

  • SLC Loops:
    • Two-wire SLC loop connection
    • Unit uses base for wiring
  • Addressing:
    • Addressable by device
    • Rotary, decimal addressing: 1- 159 for models SMX and STX
  • Architecture:
    • Sleek, low-profile, stylish design
    • State-of-the-art thermistor technology for fast response
    • Integral communications and builtin device-type identification
    • Built-in tamper resistant feature
    • Built-in functional test switch activated by external magnet
  • Operation:
    • Factory preset at 135°F (57°C) for the HM-FHSE-UL and HM-RHSE-UL; 190°F (88°C) for the HM-HTSE-UL
    • Rate-of-rise triggers at 15°F (8.3°C) per minute for the H355R(A)
    • 360-degree viewing angle of the visual alarm indicators. LEDs blink red in Normal condition and steadily illuminate red in Alarm
    • Visible LEDs blink every time the unit is addressed Mechanicals:
    • Sealed against back pressure
    • SEMS screws for wiring of the separate base
    • Designed for direct-surface or electrical-box mounting
    • Plugs into separate base for ease of installation and maintenance
  • Other system features:
    • Remote test feature from the panel
    • Walk test with address display
    • Low standby current
    • 94-5V plastic flammability rating
  • Options:
    • Flanged surface mounting kit

HM/PSE/UL

The HM-PSE-UL addressable, low-profile plug-in photoelectric detectors use a state-of-the-art photoelectric sensing chamber with communications to provide open area protection – used exclusively with Fire Alarm Control Panels (FACPs). Since these detectors are addressable, they will help emergency personnel quickly locate a fire during its early stages, saving precious rescue time while also reducing property damage. It comes with two LEDs on each sensor light to provide a local, visible sensor indication.

  • SLC Loop:
    • Two-wire SLC loop connection
    • Unit uses base for wiring
  • Addressing:
    • Addressable by device
    • Rotary, decimal addressing: 1- 159 for models SMX and STX
  • Architecture:
    • Unique single-source, dual-chamber design to respond quickly and dependably to a broad range of fires
    • Sleek, low-profile desig.
    • Integral communications and built-in type identification
    • Built-in tamper-resistant feature
    • Removable cover and insect-resistant screen for simple field cleaning
  • Operation:
    • Withstands air velocities up to 4,000 feet-per-minute (20 m/sec.) without triggering a false alarm
    • Factory preset at 1.5% nominal sensitivity for panel alarm threshold level
    • Visible LED blinks when the unit is addressed (communicating with the fire panel) and latches on in Alarm mode
  • Mechanicals:
    • Sealed against back pressure
    • Direct surface mounting or electrical box mounting
    • Mounts to: single-gang box, 3.5” (8.89 cm) or 4.0” (10.16 cm) octagonal box, or 4.0” (10.16 cm) square electrical box (using a plaster ring — included)
  • Other System Features:
    • Fully coated circuit boards and superior RF/transient pro-tection
    • 94-V0 plastic flammability rating
    • Low standby current

HM/FHSE/UL

The HM-FHSE-UL, HM-RHSE-UL and HM-HTSE-UL Series thermal detectors are addressable sensors that use a stateof-the-art thermistor sensing circuit for fast response. These sensors provide protection for open areas and can be used use with addressable Fire Alarm Control Panels (FACPs).

The HM-FHSE-UL and HM-RHSE-UL sensors provide fixed temperature detection at 135°F (57°C). The HM-RHSE-UL sensor also responds to rate of rise conditions of greater than 15°F (8.3°C) per minute. The HM-HTSE-UL is a fixed, high-temperature detector that activates at 190°F (88°C). These thermal detectors provide addressable property protection for a variety of applications.

Comes with two LEDs on each sensor that provide a local, visible sensor indication. The remote LED annunciator capability is available using an optional accessory, the RA100Z.

  • SLC Loops:
    • Two-wire SLC loop connection
    • Unit uses base for wiring
  • Addressing:
    • Addressable by device
    • Rotary, decimal addressing: 1- 159 for models SMX and STX
  • Architecture:
    • Sleek, low-profile, stylish design
    • State-of-the-art thermistor technology for fast response
    • Integral communications and builtin device-type identification
    • Built-in tamper resistant feature
    • Built-in functional test switch activated by external magnet
  • Operation:
    • Factory preset at 135°F (57°C) for the HM-FHSE-UL and HM-RHSE-UL; 190°F (88°C) for the HM-HTSE-UL
    • Rate-of-rise triggers at 15°F (8.3°C) per minute for the H355R(A)
    • 360-degree viewing angle of the visual alarm indicators. LEDs blink red in Normal condition and steadily illuminate red in Alarm
    • Visible LEDs blink every time the unit is addressed Mechanicals:
    • Sealed against back pressure
    • SEMS screws for wiring of the separate base
    • Designed for direct-surface or electrical-box mounting
    • Plugs into separate base for ease of installation and maintenance
  • Other system features:
    • Remote test feature from the panel
    • Walk test with address display
    • Low standby current
    • 94-5V plastic flammability rating
  • Options:
    • Flanged surface mounting kit