Search for:
MHR/1

MHR/1: HONEYWELL MORLEY Mini-horn/Red SpectrAlert Advance Series Mini-Horn

Honeywell’s MHR/1 min-horn features a red housing and universal fire symbol to meet virtually any application requirement. A mounting plate allows the device to be compatible with a wide range of backbox sizes. Its settings are done using easy-to-set rotary switches on the back of the device while synchronization is achieved without the use of additional modules.

FEATURES

  • 12 and 24V operation
  • Mounts to single gang back box
  • Compatible with MDL sync module
  • Mechanically and electrically compatible with PA400 series
    Mini-Alert™ sounders
  • Listing for ceiling or wall mounting

DATASHEETS

SYS/HS/C

Ceiling-mount Strobe

Honeywell’s SYS/ST/C strobe features a red housing and universal fire symbol to meet virtually any application requirement. A mounting plate allows the device to be compatible with a wide range of backbox sizes. Its settings are done using easy-to-set rotary switches on the back of the device while synchronisation is achieved without the use of additional modules. When powered with a filtered DC source, it is capable of self synchronization for 30 minutes per NFPA72.

SYS/ST/C

Ceiling-mount Strobe

Honeywell’s SYS/ST/C strobe features a red housing and universal fire symbol to meet virtually any application requirement. A mounting plate allows the device to be compatible with a wide range of backbox sizes. Its settings are done using easy-to-set rotary switches on the back of the device while synchronisation is achieved without the use of additional modules. When powered with a filtered DC source, it is capable of self synchronization for 30 minutes per NFPA72.

PS230
PS230
XFE1140-P x 10 (EN54 DOT & ARROW) Pack of ten resettable elements
PS230

Pack of ten resettable elements

M200E-SMB
M200E-SMB
ANALOGUE I/FACE DET MODULE S/FACE BO
M200E-SMB

Surface mounting box

M200E-DIN
ANAL. I/FACE D.MOD D/RAIL MOUNT
M200E-DIN

Notifier M200E-DIN DIN rail mounting clip for interface modules

WST-PR-N05
WST-PR-I05
AV PHASE II STROBE NON ISO
WST-PR-I05

The wall mounted strobe is installed in exactly the same manner as an intelligent
fire detector. A separate, common installation base (Part No. MI/B50IAP/IV)
which accepts any product within Honeywell Morley

FEATURES
  • High output LED array technology
  • Rotary decade address switches
  • Lower power requirements
  • Optional IP65 rating
  • Optional built-in isolator
  • Specification EN54

020-891
020-891
HONEYWELL ISOL USB UP/DOWNLOAD LEAD
020-891

USB Upload/Download Lead The lead provides the interface between a PC and
any Morley-IAS fire alarm control panel. 020-891 USB upload/download lead

WSS-PR-N05
WSS-PR-N05
AV PHASE II S/STROBE NON ISO
WSS-PR-N05

Intelligent Wall Mounted Sounder Strobe, Pure White skirt, Red lens, with sensor mounting base

BSS-DR-N05
AV PHASE II BASE S/STROBE NONISO
BSS-DR-N05

Morley -IAS’s new modular range of Intelligent AV warning devices provides easier system confi guration and
fl exibility. A common base across AV and detectors is available, allowing for easier installation and ordering.
These devices are all available with isolators, providing you with a fl exible approach and allowing for easier fault-fi nding on the loop.