Search for:
RI/W/3V
Remote LED (flush mounting). Requires a single gang backbox for mounting.
RI/W/3V

The RI/W/3V remote indicator unit is designed for fi re detection systems requiring local indication of an individual or group of fi redetectors in alarm. The unit is fi tted with LED providing a wide area of illumination and high on/off contrast for easy viewing.

Using a single gang purpose designed moulding, the unit operates with all Notifi er analogue addressable fi re detectors.

FEATURES
  • Industrial construction
  • Terminal block wiring
  • Ultra-bright LED
  • Suitable for analogue addressable systems.

795-077-020
20 Zone LED Card, includes PCB, ribbon cable & fixings. Zone LED PCB is fitted below the display card and increases the total number of zone LEDs to 20.
795-077-020

Morley 20 LED card which has been designed for use with the ZX range of intelligent control panels. The card comes complete with a PCB, ribbon cable and fixings. The zone LED PCB is fitted below the display card and increases the total number of zone LEDs to 40.

FEATURES
  • Multi-protocol
  • Modular concept
  • Simple, robust design
  • Intuitive to use
  • Easy to maintain
  • Easy to expand
  • Easy to network
  • Easy to install
  • Easy to configure

795-077-060
60 Zone LED Card, includes PCB, ribbon cable & fixings. Zone LED PCB is fitted below the display card and increases the total number of zone LEDs to 80.
795-077-060

795-077-060 60 zone indication expansion module for ZX5e/ZX5Se control panels.

Manufactured by Morley, this Morley Additional 60 Zone LED Card 795-077-060 is a 60 Zone LED Card, including PCB, ribbon cable & fixings. Zone LED PCB is fitted below the display card and increases the total number of zone LEDs to 80.

60 zone led card for use with the Morley ZX range of intelligent fire alarm control panels. The card includes PCB, ribbon cable & fixings for convenience. The zone LED PCB is fitted below the display card and increases the total number of zone LEDs to 80.

709-752
Morley-IAS Stainless steel semi-flush Active repeater. Silence, Mute, Reset, Accept, Evacuate and Test controls. Requires a 24Vdc supply and a RS485 card when used with ZX control panels. 165 x 254 x 50mm (H x W x D).
709-752

Honeywell (709-752) Stainless Steel Semi-flush Active Repeater

Silence, Mute, Reset, Accept, Evacuate and Test controls. Requires a 24Vdc supply and a RS485 card when used with ZX control panels. 165 x 254 x 50mm (H x W x D).

The Morley-IAS repeaters are compact remote control units for Morley-IAS intelligent multi protocol fire alarm control panels. These units, along with other I/O peripheral devices and the external printer further enhance the flexibility and functionality of our fire alarm control panel range.

The repeaters provide an extension to the operation of the fire alarm control panel. There are two types available – passive with indications only and no controls, or active with both controls and indicators. Both display the operational state of the control panel using the 80 character LCD display and the 7 LED status indicators.

In addition to the general status indicators the Active repeater is fitted with key operated “Access Enable” switch for the control functions. Individual buttons are provided for System Reset, Mute, Accept, Sound Alarms, Silence/Re-sound Alarms and Self test. Thus enabling control functions to be duplicated in strategic locations around the installation.

The Active repeater includes an integral self test sequence guiding the operator through a preset sequence to test the functionality of the control buttons, key-switch and display indicators.

FEATURES
  • Compatible with all Morley-IAS intelligent multi protocol fire alarm control panels
  • Connects to RS485 peripheral bus
  • Backlit adjustable alphanumeric display
  • General status LEDs
  • Controls for system reset, accept, mute, silence alarms, and self test (active repeater only)
  • “Access Enable” key-switch on active repeater