PS230

XFE1140-P x 10 (EN54 DOT & ARROW) Pack of ten resettable elements PS230 Pack of ten resettable elements…

M200E-SMB

ANALOGUE I/FACE DET MODULE S/FACE BO M200E-SMB Surface mounting box…

M200E-DIN

ANAL. I/FACE D.MOD D/RAIL MOUNT M200E-DIN Notifier M200E-DIN DIN rail mounting clip for interface modules…

WSS-PR-N05

AV PHASE II S/STROBE NON ISO WSS-PR-N05 Intelligent Wall Mounted Sounder Strobe, Pure White skirt, Red lens, with sensor mounting base…

WST-PR-I05

AV PHASE II STROBE NON ISO WST-PR-I05 The wall mounted strobe is installed in exactly the same manner as an intelligentfire detector. A separate, common installation base (Part No. MI/B50IAP/IV)which accepts any product within Honeywell Morley FEATURES High output LED array technologyRotary decade address switchesLower power requirementsOptional IP65 ratingOptional built-in…

020-891

HONEYWELL ISOL USB UP/DOWNLOAD LEAD 020-891 USB Upload/Download Lead The lead provides the interface between a PC andany Morley-IAS fire alarm control panel. 020-891 USB upload/download lead…

BSS-DR-N05

AV PHASE II BASE S/STROBE NONISO BSS-DR-N05 Morley -IAS’s new modular range of Intelligent AV warning devices provides easier system confi guration andfl exibility. A common base across AV and detectors is available, allowing for easier installation and ordering.These devices are all available with isolators, providing you with a fl …

WRR

AV PHASE II RED W/PROOF DEEP BASE WRR Addressable sealed deep base, Red, for isolated and non-isolated detectors and IAV devices. (includesB501-AP)…

WSO-PR-N05

AV PHASE II SOUNDER NON ISO WSO-PR-N05 WSO-PR-N05 Honeywell Morley Addressable Loop Sounder…

BSO-DD-N05

AV PHASE II BASE SOUNDER NON I BSO-DD-N05 Intelligent Integrated Detector Base Sounder, Detector White รุ่น BSO-DD-N05 ยี่ห้อ Honeywell…

BSS-DR-I05

AV PHASE II BASE S/STROBE ISO BSS-DR-I05 Intelligent Integrated Base Sounder Strobe, White with Isolation รุ่น BSS-DR-I05 ยี่ห้อ Honeywell…

BSO-DD-I05

AV PHASE II BASE SOUNDER ISO BSO-DD-I05 KAC’s base sounder is a high quality loop powered device designed to alert building occupants of anemergency. It utilizes the System Sensor B501AP base for improved installation flexibility and integratesseamlessly with SS intelligent detectors. When triggered by the fire panel its powerful sounder…

BPW

WHITE SURFACE MOUNT DEEP BASE BPW Addressable deep base, White, for isolated and non-isolated detectors and IAV devices. (includes B501-AP)…

BRR

AV PHASE II RED SURFACE MOUNTDEEP BASE BRR Addressable deep base, Red, for isolated and nonisolated detectors and IAV devices. (includes B501-AP)…

MI-MM3E-S2

EUROPEAN MINI-MOD MORLEY MI-MM3E-S2 The MI-MM3E-S2 is an addressable input module. It will interface with contact devices such as security contacts, waterflow switches and call points.It is capable of being connected in Class B wiring configurations.It provides a two-wire initiating circuit for normally open contact fire alarm and security devices.In…

BDD

DETECTOR WHITE SURFACE MOUNT DEEP BASE BDD Surface mount deep base in red, detector white (ivory) or pure white…

MI/PTSE/S2/IV

PHOTO THERMAL DET, ADV PROTOCAL,MOR, IN MI/PTSE/S2/IV S200A incorporates major hardware and software technology driven developments. A completely new optical chamber design is proven in extensive testing to be more efficient, less liable to is proven in extensive testing to be more efficient, less liable to false alarm due to…

MI/DMMI

INPUT MODULE SINGLE, MIAS, IN MI/DMMI /MI-DMM2I The MI-DMMI and MI-DMM2I monitor modules are used with the Morley-IAS intelligent fire alarm control panels to provide a single or dual input circuit from external devices.Each input is continuously monitored for normal, open circuit and alarm conditions. Changes to the status ofthe…

MI/MCP/FLEX

ADD.MCP,MIAS,FLEXI,INEADER MI/MCP/FLEX The MI-MCP Series Manual Call Points are designed to provide a manual alarm interface to Morley IAS’s fire alarm control panel. Installation efficiency, flexibility and compliance with the latest standards are at the heart of the call point range.The unique ‘plug and play’ concept is designed specifically to…

MI/DCZRM

PCONVENTIONAL ZONE MODULE, MIAS, IN MI/DCZRM The MI-DCZRM addressable zone monitor module allows a zone of non-addressable devices to communicate with a Morley-IAS protocol analogue addressable system. As a result existing non-addressable zones can be integrated into a Morley-IAS protocol system.The module monitors a zone of two-wire non-addressable devices. Each…

MI/DISO

ISOLATOR MODULE, MIAS, IN MI/DISO The Morley-IAS loop isolator module is used on the Morley-IAS intelligent fire alarm control panels toprotect the system against wire-to-wire short circuits on the analogue addressable loop wiring.The fault isolator modules should be placed between groups of sensors on the loop wiring to protect the…

MI/DMM2I

PINPUT MODULE DUAL, MIAS, IN INPUT MODULE SINGLE, MIAS, IN MI/DMMI /MI-DMM2I The MI-DMMI and MI-DMM2I monitor modules are used with the Morley-IAS intelligent fire alarm control panels to provide a single or dual input circuit from external devices.Each input is continuously monitored for normal, open circuit and alarm conditions.…

MI/D2ICMO

2 INPUT, 1 OUTPUT MODULE, MIAS, IN MI/D2ICMO The MI-D2ICMO dual input/single output modules are used with the Morley-IAS intelligent fire alarm controlpanels to provide a dual input circuit from external devices and a single relay control output circuit.Each input is continuously monitored for normal, open circuit and alarm conditions.…

MI/DCMO

OUTPUT MODULE, MIAS, IN MI/DCMO The Morley-IAS MI-DCMO control output module is used with the ZX series of intelligent conrol panels to provide either a single alarm circuit or Form C relay.The MI-DCMO can be used to operte dry contacts for door holders, air handling unit shut down or othersimilar…

MI/D240CMO

OUTPUT MODULE 240V, MIAS, IN MI/D240CMO /MI-D240CMO-DIN The Morley-IAS MI-D240CMO and MI-D240CMO-DIN control output modules are used with the Morley-IASintelligent fire alarm control panels to provide management of 240Vac loads.The modules are loop powered devices controlling an unsupervised double pole relay output with onenormally open and one normally closed contact.…

HM/PSE/I

OPTICAL SMOKE DETECTOR WITH ISOLATOR HM/PSE /HM/PSE/I Morley-IAS – HM-PSE-I Photoelectric Addressable Smoke Detectors For Fire Alarm SystemThe HM-PSE-I Photoelectric Smoke Detectors smoke detector has a completely new detection chamber design, the result of many years of research and development. This delivers improved responsiveness, reduced sensitivity changes caused by settling…

HM/MCP/GLASS

MCP, MORLEY, LPCB HM/MCP/GLASS The call point is an addressable break glass manual call point which has a simple rotary decade switch at the rear of the unit for addressing.A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch…

MI/B501AP/IV

MIAS 200 Series Advance Base SERIES B501AP-IV base for 200 (FX-LC compatible) series detectors in FX NET Fire Detection Systems…

B524IEFT-1

DETECTOR BASE Mosfet Isolator Base Std B524IEFT-1 The System Sensor B524IEFT-1 isolator base is designed for use with all System Sensor 200 analogue addressable detectors. The B524IEFT isolator base prevents an entire communications loop from being disabled when a short circuit occurs. It achieves this by isolating the part of…

MI-HTSE-S2-IV

78°C Thermal Sensor MI-HTSE-S2-IV S200A incorporates major hardware and software technology driven developments. A completely new optical chamber design is proven in extensive testing to be more efficient, less liable to is proven in extensive testing to be more efficient, less liable to false alarm due to dust and insects…

MI-LPB2-S2I

PRODUCT HEADER MI-LPB2-S2I The MI-LPB2 is an addressable reflector- type linear optical beam smoke detector, designed to operate as a component of an intelligent fire alarm system. It operates primarily on the principle of light obscuration utilising an Infra-Red beam. Optical beam smoke detectors are particularly appropriate for protecting buildings…

MI-PTIR-S2I-IV

Smoke/Thermal/IR Sensor with Isolator MI-PTIR-S2I-IV S200A incorporates major hardware and software technology driven developments. A completely new optical chamber design is proven in extensive testing to be more efficient, less liable to is proven in extensive testing to be more efficient, less liable to false alarm due to dust and…

MI-PTIR-S2-IV

Smoke/Thermal/IR Sensor MI-PTIR-S2-IV S200A incorporates major hardware and software technology driven developments. A completely new optical chamber design is proven in extensive testing to be more efficient, less liable to is proven in extensive testing to be more efficient, less liable to false alarm due to dust and insects and…

MI/RHSE/S2I/IV

Rate of Rise Thermal Sensor with Isolator MI/RHSE/S2I/IV S200A incorporates major hardware and software technology driven developments. A completely new optical chamber design is proven in extensive testing to be more efficient, less liable to is proven in extensive testing to be more efficient, less liable to false alarm due…

MI/RHSE/S2/IV

Rate of Rise Thermal Sensor MI/RHSE/S2/IV S200A incorporates major hardware and software technology driven developments. A completely new optical chamber design is proven in extensive testing to be more efficient, less liable to is proven in extensive testing to be more efficient, less liable to false alarm due to dust…

MI/PSE/S2I/IV

Smoke Sensor with Isolator MI/PSE/S2I/IV S200A incorporates major hardware and software technology driven developments. A completely new optical chamber design is proven in extensive testing to be more efficient, less liable to is proven in extensive testing to be more efficient, less liable to false alarm due to dust and…

MI/FHSE/S2/IV

58°C Thermal Sensor MI/FHSE/S2/IV S200A incorporates major hardware and software technology driven developments. A completely new optical chamber design is proven in extensive testing to be more efficient, less liable to is proven in extensive testing to be more efficient, less liable to false alarm due to dust and insects…

MI/PSE/S2/IV

Smoke Sensor MI/PSE/S2/IV S200A incorporates major hardware and software technology driven developments. A completely new optical chamber design is proven in extensive testing to be more efficient, less liable to is proven in extensive testing to be more efficient, less liable to false alarm due to dust and insects and…

HM/PTSE

OPTICAL-THERMAL SMOKE DETECTOR HM/PTSE Honeywell Morley-IAS HM Series detectors incorporate modern hardware and software technology driven developments. An advanced optical chamber design is proven in extensive testing to be more efficient, lessliable to false alarm from dust and insects and less susceptible to fault in high air velocities or back…

HM/RHSE

RATE OF RISE HEAT DETECTOR HM/RHSE Honeywell Morley-IAS HM Series detectors incorporate modern hardware and software technology driven developments. An advanced optical chamber design is proven in extensive testing to be more efficient, lessliable to false alarm from dust and insects and less susceptible to fault in high air velocities…

HM/PSE

OPTICAL SMOKE DETECTOR HM/PSE Honeywell Morley-IAS HM Series detectors incorporate modern hardware and software technology driven developments. An advanced optical chamber design is proven in extensive testing to be more efficient, lessliable to false alarm from dust and insects and less susceptible to fault in high air velocities or back…

HM/FHSE

PFIXED TEMPERATURE HEAT DETECTOR HM/FHSE Honeywell Morley-IAS HM Series detectors incorporate modern hardware and software technology driven developments. An advanced optical chamber design is proven in extensive testing to be more efficient, lessliable to false alarm from dust and insects and less susceptible to fault in high air velocities or…

TG-DXC

TG SOFTWARE SERIES GRAPHIC MANAGEMENT SOFTWARE TG-DXC The TG Morley-IAS graphic program allows fast and easy administration of any incident that arises in one or more centres directly from a PC. It is possible to include sounds, voice or video for any type of incident arising in the system.Using the…

TGP-DXC

GRAPHIC SOFT LICENSE FOR Dxc TGP-DXC Honeywell TGP-DXC. TGP-DXC DXC central additional expansion license Licencia adicional de programa de graficos para centrales dxc. permite la conexion de una central. FEATURES Programm expansion license for graphic management of DXC TGP-DXC centrals.For the control of an additional central within the TG-XXX base…

709-701-001

Morley-IAS Passive Repeater 709-701-001 Morley-IAS Repeaters Active and Passive Fire Alarm Control Panel repeatersThe Morley-IAS repeaters are compact remote control units for Morley-IAS intelligent multi protocol fire alarm control panels.These units, along with other I/O peripheral devices and the external printer further enhance the flexibility and functionality of our fire…

795-124

KIT DXc 80 ZONE LED CARD 795-124 Zone LED KitsDXc Control panels are supplied without zone LEDs. Two zone LED kits are available that include PCB,ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door asshown on the right.…

020-910

DXc Expansion Mimic PCB 020-910 Allows geographic ‘floor map’ zonal indicators to be built for situations where increased clarity ofthe fire location is required above that given by the standard numbered zonal indicators. Both mimic driver and Expansion mimic cards support 16 zones and can be connected together to create…

709-601-001

Morley Active Repeater 709-601-001 DXc Range Data Sheet 1, 2 and 4 loop, networkable,multi-protocol, analogue addressable fi re alarm control panel The Morley-IAS DX Connexion panel is ideally suited for use in the protection of small to medium sized buildings. All in all, a compact, high performance, feature rich, economical…

DXC/149/KIT

DXc-149-Kit with Conventional Sounder DXC/149/KIT Honeywell Fire Alarm Morley Software Model DXC/149/KITDXC 98 DEVICE 49 PLUS 49 PANEL…

020-909

DXc Compact Mimic Driver LEDs 020-909 Allows geographic ‘floor map’ zonal indicators to be built for situations where increased clarity ofthe fire location is required above that given by the standard numbered zonal indicators. Both mimic driver and Expansion mimic cards support 16 zones and can be connected together to…