Category Archives: HN AUDIO SOURCE

X-NPMI-D

X-NPMI Configurable Network Paging Console

• 4.3-inch color LCD touch screen
• Intuitive and simple user interface
• Detachable gooseneck microphone
• Built-in monitor loudspeaker
• Digital audio processing
• Flush mount desktop installation available

X-NPMI Configurable Network Paging Console is a key module in X-618 Digital Public Address and
Voice Alarm System. It provides paging, monitoring, full duplex communication, touch screen operation and other configurable functions.

FEATURES

CONNECTIONS

• X-618 system can connect with up to 20 X-NPMI via Ethernet. X-NPMI can be used as a node anywhere in the network. To reduce wiring cost, the devices can be connected into an existing network provided that there is sufficient bandwidth to reduce wiring cost.

AUDIO TRANSMISSION

• The device comes with a detachable gooseneck microphone. Users can change different types of microphone for different real-time broadcasting requirements. The received audio signal will be digitalized to eliminate sound distortion during transmission.
• The built-in speaker not only can be used for zone monitoring but also full-duplex intercom with other X-NPMI in the network.
• X-NPMI supports fail-safe operation. Even when the connected X-DCS2000/EN fails, X-NPMI is still able to communicate with other X-NPMI and broadcast through other X-DCS2000/EN in the network.

TOUCH SCREEN

• Users can operate directly on the innovative 4.3-inch color LCD touch screen without adding an extra key module unit. With the touch screen, users can supervise the system status, select broadcast zones, assign zone groups or other broadcast controls, including setting playlists, timing road castings etc. With the built-in configuration software, zones broadcast status or button functions can be configured easily.

SHORT-CUT OPERATION

• X-NPMI has three short-cut buttons on the operation panel: microphone switch, all-zone emergency broadcast button can switch the system to emergency broadcast mode, where recorded evacuation message will be played and fire alarm will be activated without delay.

HMC-2000-D

DIntevio Call Station

About The Intevio Public Address And Voice Alarm
Range

Honeywell’s INTEVIO Public Address and Voice Alarm system is the ideal solution for single buildings. It is an integrated solution that can provide better stability, costsavings, and higher user experience and performance:

Better safety and stability
• Complies with international standards
• A highly compact and integrated system
• Simple and easy to use with an innovative design
• Provides easy access to status updates, amplifier backup, logging and direct paging capabilities
Highly efficient solution
• Plug-and-play with default settings
• Intuitive set-up with step-by-step guided interaction between buttons and screens
• Can achieve all calls by configurable keys
• Auto configures when components are physically connected

Description
HMC-2000 is the call station for the INTEVIO system which allows user to deliver live paging and trigger background music, service broadcast or emergency broadcast to the selected speaker groups. It can also be used for volume control, temporary recording and audio monitoring, etc. Up to 6 call stations can be connected together in the system.

Functions
• Buttons
HMC-2000 has 8 functional buttons and 8 free configurable buttons. The functional buttons are used for regular functions such as all call, zone close, audio monitoring, temporary recording, recording playback, line input selection and microphone switch. The configurable buttons can be programmed as speaker group selection, broadcast task selection or volume control. The operation mode of the buttons can be configured as press or toggle. More buttons can be added by connecting extension keypad X-K4 and X-K8.

• Audio monitoring
HMC-2000 has the built-in monitoring speaker to monitor the audio source in channel 1 and channel 2, which helps prevent mistaken broadcasting and increase operation efficiency.
• Record and play
HMC-2000 allows user to record the temporary messages and broadcast it immediately without configuration. It’s a function for operation efficiency improvement, especially for the application such as shopping mall/supermarket where the promotion message needs to be frequently updated.
• Fault detection and status indication
HMC-2000 can detect the fault of the gooseneck microphone and communication line. It has 4 LED
indicators to show different status of the unit: power supply, general fault, network fault and busy audio channel.
• Line input
With one line input, HMC-2000 allows user to connect the external audio source such as CD, DVD, tuner,
etc. and broadcast it without configuration. • With 1 line

FEATURES

• 8 free configurable buttons, expandable with keypad X-K4/X-K8
• Built-in loudspeaker for audio monitoring
• Supports temporary record and playback
• With 1 line input to connect with external audio source

X-NRI/EN-D

X-NRI/EN-D Network Resource Interface

X-NRI/EN-D

X-NRI/EN-D Network Resource Interface is a universal interface of X-618 for external control access and audio extension. It is suitable to the needs of central interfaces management required by middle-to-large applications. The device provides 4 external audio source interfaces and 1 built-in audio source. These audio sources are network audio source which can be shared in the Ethernet.

FEATURES

• BACKUP POWER SUPPLY
  • X-NRI/EN applies main power supply and 24 VDC backup power supply. Through software configuration, the fault of power supply can be detected. By default the device is running on main power. When the main power is disabled, it automatically relays to backup power supply and the main power indicator on X-NRI/EN front panel turns yellow at the same time.As long as the main power resume to normal, the power supply switch back to main power.
• POWER SUPPLY PROTECTION
  • X-NRI/EN has main power protection. When internal short circuit or other forms of malfunction come across, the main power supply will be cut off for protection of the device.
• SELF DETECTION
  • By self detection function, X-NRI/EN can detect faults include Main/Backup power supply, system malfunction, and communication fault and has respective indicators on the front panel. When there is a fault, the fault indicator turns yellow and siren goes off to warn the operators and the fault status will be logged.
• EXTERNAL AUDIO SOURCE DELIVERY
  • X-NRI/EN has 4 RCA terminals for external audio source input. They can be configured by system software in terms of On/Off, the name of audio, multicast address and the type of interfaces, etc. During installation, the external audio source is required physically connection with the inputs and by using X-SMART software, X-NPMI/EN and X-DCS2000/EN to select the target zones and audio, the audio source can be delivered.
  • External audio sources can be connected to XNRI/EN directly such as CD or DVD. There are 4 balanced inputs for paging station connection and through dip switch on the right of rear panel, volume GAIN level can be adjusted and phantom power supply can be turned on/off.The power supply voltage of phantom power supply is DC 24V.
• VOICE ALARM
  • X-NRI/EN provides 32 x dry contact inputs with monitoring for fire alarm integration. Through XSMART software, voice alarm zones of each XDCS2000/EN can be planned in accordance with fire alarm zones as well as the adjacent zones which required by international voice alarm standard. When fire alarm triggering the X-NRI/EN, it automatically communicate with the triggered X-DCS2000/EN and override the BGM broadcast by preserved voice message of emergency. When proceeding voice alarm in the zones on fire, X-DCS2000/EN can deliver the different evacuation message to preset adjacent zones.