584945
Roll socket for 192 rack,
Roll socket for 192 rack,
Connector set for 19″ racks
Wheels to build under 19″ rack
Aspirator to built in 19″ rack
Built-in light for 19″ rack,
Mounting rail 800 mm f. 19″ rack
Base frame with depth-adjustable 19″level on the front and rear side, prefabricated with a 105 mm clearance to the doors Front door with a 4 mm ESG pane (parsol gray) Rear door steel plate Door lock with a swivel lever for 40 mm PHZ and multi point locking Removable side walls, lockable Three-part base plate, passively ventilated Roof with a brush strip and cover plate, prefabricated for the fan assembly Cabinet completely grounded
Housing for PA/VA small system Comprio without swivel frame. Housing can be used as free standing housing or for wall mounting. It is 12 HU high and an area of 600 mm x 600 mm and serves for acceptance of Comprio control unit; a four-channel amplifier 4XD125B or 4XD250B with built in emergency power supply, corresponding batteries (up to 105 Ah) and a ventilation field. Furthermore there are 2 or 3 height units (corresponding which amplifier is used), e.g. for the installation of additional components such as recording units. If more space is needed, another 19″ Rack from our upright cabinet line can be used.
Pivot frame Welded 100 mm plinth, with holes for floor mounting and cable entry Rear and side walls detachable, on request, and ventilated Three-part base plate Roof with a brush strip and cover plate Front door with a 4 mm ESG pane Door lock with a swivel lever for 40 mm PHZ and multi point locking Cabinet completely grounded Screws set M6 (VE 50 set)
Pivot frame Welded 100 mm plinth, with holes for floor mounting and cable entry Rear and side walls detachable, on request, and ventilated Three-part base plate Roof with a brush strip and cover plate Front door with a 4 mm ESG pane Door lock with a swivel lever for 40 mm PHZ and multi point locking Cabinet completely grounded Screws set M6 (VE 50 set)