Search for:

586115

Doormaster-Smart-PAL-Telephone interface
586115

DOORMASTER-SMART-PAL-Telephone interface is used for recording the announcements via similar
telephone system in VARIODYN D1 voice alarm system. Up to 4 different call circuits or areas can be
addressed using the telephone system. For this purpose 1+ 4 control contacts are available for switching on
and/or zone selection.

The connection of telephone interface to VARIODYN D1 takes place via control inputs and audio input of
UIM Part. No. 583331.21. 12 V operating voltage can be generated from 24 V emergency power supply
with voltage converter Part No. 781336 that is available in the voice alarm system. The voltage converter
can be mounted in housing Part No. 788603 on the C-rail in rack.

The programming takes place with MFV post dial, so that the device can also be used from distance.

FEATURES
  • Operating voltage : 12 V DC 
  • Current consumption @ 12 V DC : approx. 100 mA 
  • Contact load relay :  24 V DC/0,5 A (relay 1/2)
  • Ambient temperature :   -5 °C … 45 °C 
  • Mounting :  mounting rail 
  • Dimensions :    W: 52 mm H: 89 mm D: 57 mm

586116

Power supply for telephone interface
586116

Power supply for telephone interface part no. 586115

FEATURES
  • Rated voltage : 127 / 230 V AC
  • Output voltage : 13 V AC
  • Output current : max. 0.6 A

586103

Table call station with DIGIM4

586104

Flush-mount box f. DIGIST09

584971

Contactor 3×25 A
584971

In combination with the neutral conductor monitoring module (Part No. 584970) this contactor enables the safe and immediate all-pole interruption of the power supply in the event of:

  • undervoltage
  • phase failure
  • asymmetry, including for reverse voltage
  • neutral conductor missing in the system
  • neutral conductor break in the device supply cable
  • neutral conductor mixed up with phase

586102

Table call station with DIGIM1

584970

Under Voltage and neutral supervision module
584970

The neutral conductor monitoring module (Part No. 584970) should be used to protect against a break in the neutral conductor occurring. This module is connected upstream with the MSU contactor (Part No. 584971) and enables the safe and immediate all-pole interruption of the power supply in the event of:

  • undervoltage
  • phase failure
  • asymmetry, including for reverse voltage
  • neutral conductor missing in the system
  • neutral conductor break in the device supply cable
  • neutral conductor mixed up with phase.
  • Single phase connection possible

FEATURES
  • Compliant to IEC/EN 60 255, DIN VDE 0435-303
  • Single phase connection possible
  • Fixed setting value
  • Closed circuit operation principle
  • LED indicator
  • With safe disconnection compliant to IEC/EN 61 140, IEC/EN 60 947-1 between the Measuring Circuit and the contacts
  • Independent of phase sequence
  • 2 changeover contacts

584962

Housing f. two DCSF1 or DCSF12

584961

Housing f. one DCSF1 or DCSF12