ศูนย์ซ่อม HM/RHSE/UL
HM/RHSE/UL
The HM-FHSE-UL, HM-RHSE-UL and HM-HTSE-UL Series thermal detectors are addressable sensors that use a stateof-the-art thermistor sensing circuit for fast response. These sensors provide protection for open areas and can be used use with addressable Fire Alarm Control Panels (FACPs).
The HM-FHSE-UL and HM-RHSE-UL sensors provide fixed temperature detection at 135°F (57°C). The HM-RHSE-UL sensor also responds to rate of rise conditions of greater than 15°F (8.3°C) per minute. The HM-HTSE-UL is a fixed, high-temperature detector that activates at 190°F (88°C). These thermal detectors provide addressable property protection for a variety of applications.
Comes with two LEDs on each sensor that provide a local, visible sensor indication. The remote LED annunciator capability is available using an optional accessory, the RA100Z.
- SLC Loops:
- Two-wire SLC loop connection
- Unit uses base for wiring
- Addressing:
- Addressable by device
- Rotary, decimal addressing: 1- 159 for models SMX and STX
- Architecture:
- Sleek, low-profile, stylish design
- State-of-the-art thermistor technology for fast response
- Integral communications and builtin device-type identification
- Built-in tamper resistant feature
- Built-in functional test switch activated by external magnet
- Operation:
- Factory preset at 135°F (57°C) for the HM-FHSE-UL and HM-RHSE-UL; 190°F (88°C) for the HM-HTSE-UL
- Rate-of-rise triggers at 15°F (8.3°C) per minute for the H355R(A)
- 360-degree viewing angle of the visual alarm indicators. LEDs blink red in Normal condition and steadily illuminate red in Alarm
- Visible LEDs blink every time the unit is addressed Mechanicals:
- Sealed against back pressure
- SEMS screws for wiring of the separate base
- Designed for direct-surface or electrical-box mounting
- Plugs into separate base for ease of installation and maintenance
- Other system features:
- Remote test feature from the panel
- Walk test with address display
- Low standby current
- 94-5V plastic flammability rating
- Options:
- Flanged surface mounting kit